New maXTouch S Series Sets the Highest Standard for Touchscreen Performance By Eliminating the Impact of System Noise, Enabling Slim Sensors, and Supporting Active and Passive Stylus
Las Vegas, NV, Jan. 9, 2012; 2012 International Consumer Electronics Show - (), a leader in microcontroller and touch technology solutions, today announced the availability of its new family of touchscreen controllers, the next generation of the company's breakthrough unlimited touch technology. The new device family is ideal for the design of innovative and intuitive touchscreen interfaces of up to 17" diagonal for products including smartphones, tablets, digital cameras, e-readers and other applications.
System designers want to deliver a new breed of mobile products to consumers, and the right touchscreen controller can help turn their concepts into reality. Designers are envisioning products that offer an array of capabilities, including ultra-slim and light form factors, immersive responsiveness, large and high pixel-density displays, exceptionally long battery life, and multiple ways of capturing user input. With their rich features and intelligent algorithms, maXTouch S Series controllers are designed to meet these requirements, enabling designers to create the products they've always imagined.
New maXTouch S Series devices include:
- mXT224S: Building on the popularity of the mXT224 and mXT224E, a 224-node controller with all the benefits of the S Series architecture for smartphones, digital still cameras and other handheld products with touchscreens from 3.5" to 4.3".
- mXT336S: A 336-node controller that brings high-precision input to larger format superphones with screens between 4.3" and 5.5" diagonal.
- mXT1664S: A high node density, single-chip 32-bit solution targeted at tablet products with touchscreens of 10.1" and above, measured diagonally, and designed to meet the stringent requirements of Windows® 8, as well as products based on other operating systems with touchscreens up to 17" diagonal.
Eliminating Impact of Display Noise with SlimSensor™
Technology
A key feature of the maXTouch S Series, SlimSensor
Technology enables system designers to deliver mobile
products that are thinner and lighter than was previously
possible, without sacrificing immersive responsiveness,
touch fidelity or battery life.
SlimSensor Technology is a breakthrough combination of hardware and firmware innovations that combats display noise up to 3.5V from any type of display, including ACVCOM LCDs and noisier high pixel density displays. Because SlimSensor Technology features full hardware acceleration of noise-cancelling functions, it delivers this industry-leading noise immunity with a 2X improvement in responsiveness compared with the current, market-leading generation of maXTouch devices. Remarkably, the technology does not require additional listening channels, synchronization to display timing, or time-consuming tuning, which simplifies the design-in process. SlimSensor Technology's ground-breaking level of performance, and the simplicity with which it is delivered to the system designer, is unmatched by any other touchscreen controller.
With SlimSensor Technology, system designers can use leading-edge sensor technologies, including fully laminated, unshielded touch-on-lens sensors, display-integrated on-cell sensors and ultra-thin film sensors. These advanced touch sensor stacks are up to 58% slimmer than their conventional counterparts, enabling system designers to reduce end-product thickness by more than 1mm. They also have the added benefits of reducing product weight for a more enjoyable experience during prolonged periods of use as well as improving the optical clarity and the apparent brightness of the underlying display. With maXTouch S controllers featuring SlimSensor Technology, system designers can deliver mobile products that delight users with unprecedented slimness, vividness and responsiveness.
Supporting Active and Passive Stylus Solutions
maXTouch S Series controllers support Atmel's recently
announced 1mm active stylus with multiSense functionality,
which enables high-precision, simultaneous touch and stylus
input. Lower cost passive stylus with 2mm tip is also
supported at over 120Hz report rate with a dramatic 2X
improvement in linearity versus the previous generation of
maXTouch controllers. For a natural user experience, both
stylus technologies feature intelligent palm rejection. As
the stylus implementation is common across all maXTouch S
products for smartphones and tablets, a single stylus can
be used on all the user's mobile products. With
maXTouch S Series, system designers can transform mobile
products into powerful tools for productivity and
creativity on the go.
Designing the Ultimate Touchscreen - and the Ultimate
Mobile Products
Going far beyond noise cancellation, maXTouch S Series
controllers deliver additional breakthroughs for maximum
touchscreen performance:
- Fully parallelized touch sensor scanning, enabling the industry's fastest report rates
- Sensor electrode pitch that is narrower than 4.5mm in common smartphone and tablet screen sizes, for higher touch sensing and stylus tracking resolution that matches increasing display pixel density
- Improved touch-processing algorithms, for better finger-tracking precision, improved accuracy and linearity, and more sophisticated rejection of unintended touches
With these enablers, maXTouch S Series controllers easily exceed the stringent requirements for touch performance mandated by Microsoft's Windows 8 and Windows Phone 8 operating systems. With stylus support, maXTouch S controllers also enable end-products to take advantage of the latest features of Google's Android 4.0 (Ice Cream Sandwich) operating system.
"The introduction of the maXTouch S Series represents a major milestone for Atmel and a fundamental redefinition of how touchscreen design can be accomplished. Designers of industry-leading touch interface products will no longer have to compromise on touchscreen performance and extreme functionality because of system noise," said Peter Jones, vice president of the microcontroller and touch business unit, Atmel Corporation. "Freed from previous constraints, design engineers now have a technology platform with which they can unleash their creativity and integrate touch interfaces into a new breed of mobile products that will delight consumers. 2012 will be a very exciting time for Atmel and for the industry as a whole."
Availability
maXTouch S Series devices are now sampling with lead
customers. Production quantities will be available in Q1
2012.
About Atmel
Atmel Corporation (Nasdaq: ATML) is a worldwide leader in
the design and manufacture of microcontrollers, capacitive
touch solutions, advanced logic, mixed-signal, nonvolatile
memory and radio frequency (RF) components. Leveraging one
of the industry's broadest intellectual property (IP)
technology portfolios, Atmel is able to provide the
electronics industry with complete system solutions focused
on industrial, consumer, communications, computing and
automotive markets.
©2012 Atmel Corporation. All Rights Reserved. Atmel®, Atmel logo and combinations thereof, maXTouch®, SlimSensor™, maXCharger™, maXStylus™ and others are trademarks or registered trademarks of Atmel Corporation or its subsidiaries. Windows® is a registered trademark of Microsoft Corporation in the U.S. and or other countries. Other terms and product names may be trademarks of others.
Press Contact:
Jeff Erhart, Director, Corporate Marketing
Phone: (+1) 408-441-0311, Email: jeffery.erhart@atmel.com
distribué par | Ce noodl a été diffusé par Atmel Corporation et initialement mise en ligne sur le site http://www.atmel.com. La version originale est disponible ici. Ce noodl a été distribué par noodls dans son format d'origine et sans modification sur 2012-01-09 14:26:44 PM et restera accessible depuis ce lien permanent. Cette annonce est protégée par les règles du droit d'auteur et toute autre loi applicable, et son propriétaire est seul responsable de sa véracité et de son originalité. |