Alliance Resources Ltd. announced results of preliminary metallurgical testing of high grade gold samples from the Weednanna Gold Prospect, located at the Wilcherry Project Joint Venture between Alliance (61.36%) and Tyranna Resources Ltd. (38.64%) in South Australia. Testwork was conducted by ALS Metallurgy Services Australia on two composite RC samples collected from Target 1 (WDMET001) and Target 3 (WDMET003) at Weednanna, with results summarised as follows: At a grind size of P80 75µm cyanide bottle roll gold extraction (24 hr) was 89.4% for WDMET001 and 92.8% for WDMET003. Finer grind size of P80 38µm incrementally increased gold extraction for WDMET001 to 90.8% and WDMET002 to 95.5%. Leaching kinetics relatively fast at both grind sizes. Cyanide and lime consumptions are considered low in all cases. No visible free gold in the gravity concentrates. Gravity recoveries for WDMET001 were 9.2% for gold and 4.1% for silver and for WDMET003 were 13.8% for gold and 12.2% for silver. Cyanide leaching of the gravity concentrate for each sample increased total gold extraction by only 0.9% for WDMET001 and 0.6% for WDMET002. One composite sample from each of the exploration areas at Targets 1 and 3 were collected for the metallurgical testing, as follows: WDMET001 was composited from hole 17WDRC003 from 45 to 94 metres down hole, which returned 49m @ 6.3g/t Au; WDMET003 was composited from hole 17WDRC017 from 118 to 132 metres down hole, which returned 14m @ 36.1g/t Au. The samples were sourced from the 1m RC drill hole samples still in plastic bags and split two times using a 12.5% splitter into 20 litre plastic buckets to produce sub-samples of 54.8 kg for WDMET001 and 61.3 kg for WDMET003.