Kermode Resources Ltd. reported on the ongoing program of select rock sampling at the 911 Showing on the Mount Sicker project. Kermode has collected a stockpile of 13.9 tonnes of select rock material by hand sampling. This includes 10.74 tonnes from the 911 Showing East, 1.60 tonnes from the 911 Showing West, and 1.55 tonnes of Float samples.

The samples collected at the 911 Showing East were taken from the immediate area around sample #K487453, which assayed at copper 4.4% Cu over 4.4m as reported on December 18, 2023. The location of the source of the stockpile and sample #K487453 are as follows: UTM Zone 10N, easting 444599, northing 5413415. The material was described as a zone of silicified schists with grey-white quartz-sulphide veining in the foliations of schists and semi-massive sulphides in the quartz-rich areas.

The zone contains 40%-70% sulphides based on packsack drilling, and is 4.4m wide. The ongoing sampling at the 911 Showing East has been designed to select material that visually contains more sulphides than sample #K487453. The stockpile of samples at 911 Showing East was collected from bedrock within an area approximately 1.5m deep, 3m wide, and 10m long.

This is one area of mineralization that is exposed in a road built for ongoing logging as shown in the picture below. The weight was calculated by weighing all sample bags. Each bag contains approximately 100kg of rock samples and there are approximately 140 bags in the stockpile.

In addition to calculating sample weights, Kermode calculated the density of 6 samples using a water displacement method. To calculate the volume of each sample, Kermode dumped the rock sample into a full bucket of water and measured the volume of water that was displaced; Kermode then calculated density as kilograms divided by litres. Quality assurance/quality control statement: The most recent work conducted on the subject property by the company utilized commercial laboratories for all geochemical analyses and was conducted using industry-standard chain-of-custody procedures with all samples.

Due to the preliminary nature of the field geochemistry programs, no blind analytical blanks and standards were utilized by the company; and only the internal procedures employed by the commercial laboratories were utilized for QA/QC protocols. The qualified person is satisfied that these procedures and protocols are sufficient for current status of the subject property.